Clear-Com TEMPEST 2400 Spécifications télécharger pdf (Page 73)

100

Clear-Com Communication Systems Page 73 of 100

Tempest 2400 Wireless Intercom System

Beltstation Overview

1- Volume- CH A/B and CH C/D

Multipurpose Volume A/B and C/D control.

In Operational Mode turning the Volume control adjusts the volume of the

audio from channel A and B or C and D. Pressing the Volume control

changes the selected intercom between channels A and B, or C and D.

In Menu Mode turning the A/B Volume control allows the user to scroll the

options of the current menu screen. Pressing the A/B Volume control

selects the option.

2- Stage Button

The Stage Announce (STAGE) button re-routes the microphone signal of

the beltstation from the selected intercom channel to the base station rear

panel Stage Announce (SA) output connector. If desired, when this button

is pressed, a momentary relay contact closure is made at the Relay

connector. See Page 35 for the section on GPO Relays.

Pressing the Stage Announce button automatically enables the

microphone, regardless of Talk Button status. The Stage button settings

may be adjusted at the Stage Announce menu screen under the “Set

Controls” menu section.

3- Menu Button

Pressing MENU while the beltstation is in Operational mode will select Menu Mode and the Main Menu

screen will be displayed. Once in Menu Mode pressing MENU again, will act as an escape key and will

back out of the current menu screen moving the user up one level. Pressing the Menu button while at the

Main Menu screen will exit Menu Mode and return to Operational mode.

4- Enter Button

The Enter button operates differently depending on the mode of the beltstation. In Menu Mode pressing

the Enter button selects the current menu option and is the same as pressing the A/B Volume control. A

menu item is not selected until the Enter button (or the Volume control) is pressed.

The Enter button can also activate Wireless ISO (wireless talk around), providing wireless communication

isolated from any connected wired intercom system.

The Enter button is also one of the buttons that can be assigned to activate a Relay in the base station. It

is possible to activate the Relay whenever the Wireless ISO feature is used.

5- LCD

While in Operational Mode the LCD displays the status of the beltstation including the name of the

currently communicating base station, RF strength, battery level, and other data.

The LCD backlight and contrast can be adjusted from the LCD Adjustments menu screen under the

LCD/LED section.

6- CALL Button

The CALL Button sends a 2-Wire intercom system compatible call signal to any wireless beltstation and

any hardwired intercom device on the intercom channel currently selected with Talk enabled. The Call

signal will be routed to intercom channels indicated by the user’s active Talk button(s).

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 99 100

Commentaires sur ces manuels

Pas de commentaire

Clear-Com TEMPEST 2400 Spécifications Page 73

Commentaires sur ces manuels

Produits connexes et manuels pour Interphones de porte Clear-Com TEMPEST 2400