Clear-Com TEMPEST 2400 Spécifications Page 45
- Page / 100
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Clear-Com Communication Systems Page 45 of 100
Tempest 2400 Wireless Intercom System
2-Wire Wiring Schemes
Wiring schemes vary and it is important to ensure that the cables are wired correctly for proper system
operation. When Tempest is configured for a particular manufacturer’s system, Tempest routes the signal
to internal circuitry that conforms to the requirements of that system. The 3-pin XLR connectors on the
back of the Tempest base station can have very different characteristics depending on the setting of the
slide switches, as can be seen in the table below.
3-Pin Wiring Scheme and Line Characteristics
12
1
1
2
2
3
Clear-Com
AudioCom
RTS
1 COMMON
2 POWER
3 AUDIO
1 COMMON
2 AUDIO(-) & POWER
3 AUDIO(+) & POWER
1 COMMON
2 AUDIO 1 & POWER
3 AUDIO 2
MALE
MALE
MALE
Input Impedance 200Ω
Output Level 1.0 Vrms
Bridging Impedance >10 kΩ
Call Signaling:
Send 12 ±3 VDC
Receive 4 VDC Min
Power voltage 30.0 VDC
Input Impedance 300Ω
Output Level 1.0 Vrms
Bridging Impedance >10 kΩ
Call Signaling:
Send 20 kHz ±100 Hz, 5 mVrms
Receive 20 kHz ±800 Hz, 100 mVrms
Power voltage 24.0 VDC
Input Impedance 200Ω
Output Level 0.775 Vrms
Bridging Impedance >10kΩ
Call Signaling:
Send 20 kHz ±100 hz, 240 mVrms
Receive 20 kHz ±800 Hz, 100 mVrms
Power voltage 28.0 VDC
3
3
Note for 2-Wire RTS Users: RTS TW (2-Wire) systems support two intercom channels on a single XLR
cable. When connecting an RTS TW system, only one cable is required for two intercom channels. When
set to RTS mode all four of the 3-PIN XLR connectors (2 male and 2 female) for channels A&B (or C&D)
are paralleled together. RTS intercom channel 1 is placed on Tempest intercom channel A (or C) and RTS
channel 2 is place on channel B (or D).
Note for 2-Wire Clear-Com and Balanced (Audiocom) Users: For Clear-Com and Balanced 2-Wire
intercoms, use the A, B, C, and D, male or female 3-pin (XLR-3M/F) connectors on the rear panel to
connect up to 4 intercom channels. The male and female connectors for each channel are loop-through
connections and are the same point electrically. Each channel of a Clear-Com or Balanced 2-Wire system
re
q
uires one se
p
arate cable for connection to one Tem
p
est channel.
- Table of Contents 3
- A/C Power Warning 9
- Thank you from Clear-Com 10
- Battery Safety 11
- Maintenance and Care 12
- Quick Start Guide 13
- General Description 15
- Theory of Operation 17
- System Features 19
- What’s In The Box 19
- Other Items You May Need 20
- Base Station 21
- Choose a Location 22
- Base Station Location 22
- Power Connections 23
- Antenna Location 24
- Antenna Configuration 25
- Configure the Base Station 28
- Adjust Sidetone 29
- Selecting a Frequency Band 30
- Name Each Station 32
- Front Panel Lock 34
- Call Function 34
- GPO Relay Contacts 35
- Auxiliary Input/Output 36
- Stage Announce (SA) 36
- Default Settings 37
- Controls 39
- Echo Cancellation Menu 41
- Auto-Null Explained 41
- Auto-Null Procedure 43
- Test for Echo 43
- Manual Null 43
- Other Causes of Echo 44
- 2-Wire Wiring Schemes 45
- 2-W Audio links 46
- Accu-Sync 49
- Master Mode 50
- Base Station Controls 54
- Front Panel Left 54
- 7- Volume Control 55
- 8- Menu Button 55
- 9- Enter Button 55
- 10- Buttons 1 - 5 55
- 11- LCD 55
- Front Panel Right 56
- 6- IN Level Control 57
- 7- OUT Level Control 57
- 8- USB Connector 57
- 10- Power ON/OFF Switch 57
- Rear Panel Left 58
- Rear Panel Right 58
- Base Station Menu 60
- Remote Transceiver 62
- Transceiver controls 63
- Beltstation 64
- Beltstation Setup 66
- Power Options 67
- Beltstation Power On/Off 67
- Pairing with a Base Station 68
- Name Equipment 70
- Personal Preferences 70
- Set Mic Gain 71
- Wireless ISO 72
- Beltstation Overview 73
- Talk Button A/B and C/D 75
- Beltstation Menu 76
- How Do I …? 77
- From the Beltstation: 78
- From the Base Station: 78
- From the beltstation: 78
- Trouble Shooting 79
- Tempest Remote Transceiver 82
- 4-Wire intercom systems 83
- Specifications 84
- FCC Information 87
- Tempest Part Numbers 90
- Glossary 91
- Limited Warranty 93
- ECHNICAL SUPPORT POLICY 96
- EPAIR POLICY 98
Produits connexes et manuels pour Interphones de porte Clear-Com TEMPEST 2400
(16 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels