Clear-Com TEMPEST 2400 Spécifications télécharger pdf (Page 37)

100

Clear-Com Communication Systems Page 37 of 100

Tempest 2400 Wireless Intercom System

Reset Memory

There are two options to reset memory: Restore Factory Default and Clear memory.

Restore Factory Default

This option will restore all settings to factory defaults except Pairings and names.

Clear Memory

Occasionally, it may be desirable to remove all previous settings and user defined names, such as when

equipment is transferred to a new project or work site.

Clear Memory on a beltstation or a base station will require re-Pairing of beltstations. It may be necessary

to select a Frequency Band due to country specific RF requirements, on the base station. Both the base

station and each beltstation has a “Factory Default” option in the Tech Menu. Browse to the Tech Menu,

select “Factory Default”, and choose “Factory Default” or “Clear Memory”.

From the base station, “Restore Factory Defaults” only resets base station defaults. beltstation factory

defaults can be reset in each beltstation and changes are relayed wirelessly to the base station.

Default Settings

Base Station Defaults Beltstation Defaults

Headset Sidetone: 70 Headset Sidetone: 70

Headset MIC gain: 0 / 65 Headset MIC gain: 0 / 65

LCD Contrast: 30 Low Battery Alert: Enable

LCD Backlight Brightness: 80 LCD Back Light: Enable

LED Brightness: 40 Talk LED: High

Headset Talk Button: Latch Talk A/B: Latch

Set Base as Master: Off Talk C/D: Latch

Front Panel Lock: Off Lock Keys: Off

Wired intercom levels In/Out:

7/12

Volume Limits: 0 - 99

Aux In/ Out: 00/00 Call Alert: Both

Stage Announce Audio: 50 Call Button: Enable

S/A Relay: Enabled Relay Key: Not selected

Security: Disabled Select Relay: Not selected

Frequency Band: 2400-

2480Mhz

SA: Disable

Display Slot Assignment:

Dynamic

SA Relay: Enable

TCP/IP Mode: DHCP Security: Disabled

Be aware that restoring factory defaults will have an immediate effect on volume, sidetone,

relay selection, Aux In/Out levels, hardwired intercom levels, and Shared Slot settings, among

others.

This option will restore all settings to factory defaults and will delete all user defined names. All

entries will be deleted and there is no “undo”.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 99 100

Commentaires sur ces manuels

Pas de commentaire

Clear-Com TEMPEST 2400 Spécifications Page 37

Commentaires sur ces manuels

Produits connexes et manuels pour Interphones de porte Clear-Com TEMPEST 2400