Clear-Com TEMPEST 2400 Spécifications télécharger pdf (Page 16)

Clear-Com Communication Systems Page 16 of 100

Tempest 2400 Wireless Intercom System

Wireless beltstations are also compatible with hardwired system features such as Call and Mic Kill. In

addition to the shared Stage Announce relay, each wireless beltstation controls its own unique relay that

can be associated with additional events or actions at the beltstation.

Tempest 2400 series base station comes standard with two RP-TNC RF antenna connectors and an RJ-

45 connector for remote RF transceiver operation. Antennas can be fixed directly to the back of the base

station or remotely mounted using 50 ohm low loss RF cable from the RP-TNC connectors.

For instances where antennas must be located at a much longer distance from the base station, a

standard CAT-5 cable connects an optional Remote Transceiver unit that can be located up to 1,500 feet

away and is line-powered from the base station.

Large installations often require users to move from one work zone to another throughout the day.

Tempest handles these transitions with iSelect™ on-command roaming technology. Using the intuitive

LCD user interface on the beltstation and iSelect, a user can easily change their association with another

base station location in just a few seconds. Tempest Wireless beltstations remember the last 64 base

stations to which they have been paired.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 99 100

Pas de commentaire

Clear-Com TEMPEST 2400 Spécifications Page 16