Clear-Com HME DX210 Instructions d'exploitation télécharger pdf (Page 4)

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions

:(1) This device may not cause harmful interference, and (2) This device must accept any interference

received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communication. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case the user will be

required to correct the interference at his own expense.

Changes or modifications not expressly approved by Clear-Com, LLC, an HM Electronics, Inc. company

could void the user’s authority to operate this equipment.

MANDATORY SAFETY INSTRUCTIONS

FOR INSTALLERS AND USERS

Use only manufacturer or dealer supplied antennas. The Federal Communications Commission has

adopted a safety standard for human exposure to RF (Radio frequency) energy, which is below the

OSHA (Occupational Safety and Health Act) limits.

The term “IC:” before the certification/registration number only signifies that the Industry Canada

technical specifications were met.

Base Station Antenna minimum safe distance: 7.9 inches (20 cm) at 100% duty cycle.

Base Station Antenna gain: This device has been designed to operate with an antenna having a

maximum gain of up to 7dBi.

Antenna mounting: The antenna(s) used for the base transmitter must be installed to provide a

separation distance of at least 7.9 inches (20 cm) from all persons and must not be co-located or

operating in conjunction with any other antenna or transmitter.

Antenna substitution: Do not substitute any antenna for the one supplied by the manufacturer. You

may be exposing person or persons to excess radio frequency radiation. You may contact your dealer or

the manufacturer for further instructions.

WARNING: Maintain a separation distance from the base station transmit antenna to a person(s) of at

least 7.9 inches (20 cm) at 100% duty cycle.

WARNING: Excessive sound pressure level from earphones or headphones can cause hearing loss.

You, as the qualified end-user of this radio device must control the exposure conditions of bystanders to

ensure the minimum separation distance (above) is maintained between the antenna and nearby persons

for satisfying exposure compliance. The operation of this transmitter must satisfy the requirements of

Occupational /Controlled Exposure Environment, for work-related use. Transmit only when person(s) are

at least the minimum distance from the properly installed, externally mounted antenna.

Korea: 해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음

Clear-Com HME DX210 System Guide

1 2 3 4 5 6 7 8 9 ... 35 36

Pas de commentaire

Clear-Com HME DX210 Instructions d'exploitation Page 4